Sunday, May 5, 2024

bike mechanic school, week one

(This is the first of four posts; you can see the second here, the third here, the fourth here.)

 I'm writing this post (and the last two, and probably some later ones) from Ashland Oregon, home of the United Bicycle Institute, where I'm taking their two-week course in Professional Repair and Shop Operation. I've been mechanic-ing around on bikes for years, mostly self-taught, and I had this idea that it would be a good idea to get some real, official training on it, so coming to a school has been a "bucket list" thing, with which The Excellent Wife (TEW) decided to go along.

She did all the research, and found a place to stay, and set up the flights, and yadda yadda, and the next thing you know, I'm registered for the course, and we're planning to stay in Ashland. 

(Well, there's a bit more to it than that. I found out that a sort of a local bicycling-biz rival went to either this course or a competing one, and told me he didn't pass the final. And now, of course, I GOTTA pass the final, so I can gloat insufferably about it.)

Ashland itself is kind of a hippie refuge plopped into the southern Oregon mountains, an island of new-wave, woo-woo, too-much-money radicalism in the deep red heart of rural Oregon farming and logging country. There's a food cooperative whose properties cover about a full block in the city, lots of Tarot reading and moon jewelry, and a bike co-op where you can buy a beater for not-a-lotta-money, and, if you're a student at the school, you can sell it back at the end of the class for half what you paid for it. So that's what TEW and I did.



It'll only cost $47.50 after I sell it back to 'em.

School started on the Monday. There are some in the group; like me, who are taking this because we just want to (in some cases, guys - we're all guys, in this class - have known about the school for years, and are only able to get to take it now, because they've retired from an earlier career); others are currently working in the bike industry. Closer to Oregon, the certification has a certain reputation, and shops look for mechanics who have it.




The instructors, however, point out that this is a trade school, and are all business. The first part of the first day is given to introductions and basic shop skills and tool knowledge, and then we're into servicing hubs; we have to break down a loose-ball hub and rebuild it. I'm pretty good at setting the preload in these hubs, but I don't generally open them up, and when I did these, I made a stupid mistake switching balls between the front and rear. By the time I learned my mistake, I'd wasted a lot of time, and barely completed the assignment by the end of the day. Certain tasks have to be signed off each day, or be made up, and I did NOT want to have my first day marred by a missed assignment! (It turned out that for the next couple of days, I'd be shaken by my bad experience on the first day...)

But done is done; and my bench partner and I were able to complete by the end of the day; this task, and the others assigned. I've learned about the bearings, but I've also learned about having more discipline in my shop practice, and maybe not to have two tasks going, where I might get confused between them!

Most of the students are reasonable friendly, but we're still deciding how comfortable we are with each other.

I'm almost certainly the oldest at 68, and my bad back was acting up; I was initially seated where I could not see the screen where the projections are, and stood with my cane to see; my seat was later moved, and a bench stool was offered. I initially refused, but today we're doing wheels. There will be a lot of standing, and I might decide that my frailty deserves compensation, and get the stool.

My birthday is on the 6th, and two other students have birthdays. I initially thought I'd pop for a cake on Monday, but the school administrator may be making other plans; more news on that as it happens.

Tuesday:

It turned out one of the instructors' wife made us muffins for our birthday! 


Today was wheels day. I'd done research on the school, including looking up experiences of people who'd attended. I found a few (not many, and none of which I've been able to find since), and several talked about how hard doing the wheels in a single day was. I've built wheels, but I'm not good at it; I'm slow and I make mistakes I have to go back and fix. At the school, the time is limited, and the tolerances expected are demanding. Further, the school instructors and administrators know that the wheels are particularly hard for students; they set the wheels for day 2, and the final wheels aren't "due" until day eight (of ten), which allows for two late nights to work on them.

The technique they teach, though, is straightforward and repeatable. I got the wheel laced immediately. When I was tightening it up, however, it went way out of true in about every way possible. But managing that is also built into the technique - including taking breaks and going to do something else (in this case, work on the other wheel).


It didn't help that I'd had such trouble with my hub the previous day; it also didn't help that one of my fellow students didn't even get both wheels laced by the end of the day. I was worried; I didn't want to wash out on day two.

But I got 'em. I had two acceptable wheels by the end of the day, and then had them broken down and parts in the bins before I left (admittedly, in the allowed overtime at the end of the day, but still; I was done). A few other students were also done, but most were still toiling away at their truing stands when I left.

I got through wheels day. I am MUCH more relieved and confident, and likely to enjoy this class much more now. (My back and foot hurt a LOT after this, though; it turns out, in addition to the scoliosis I knew I have, I also likely have plantar fasciitis.)

Wednesday:

Today was much easier for me. We were talking about rim brake systems, and I've got a lot of experience with those. We learned a technique, new to me, for mounting road caliper brakes. I like the way I do it better, but having another technique is never a waste.

Students here are allowed a discount from a certain tool manufacturer, Abbey Tools, and from QBP, Quality Bike Products, the largest wholesaler in the US bike industry. We can get a really good discount on products from both... but everything I get, I've either got to ship back, or get into my luggage, so I'm satisfying myself with one specialty tool from Abbey and a few small things I might not buy for myself from QBP. Neither the New Brunswick Bike Exchange nor Ramblin' Wrench has the credit history or the size to have an account at QBP, so this is a bit of a missed opportunity, alas...

Thursday:

Today was for hub brakes. We touched on coaster brakes, drum brakes, and roller brakes, and  set up and adjusted a cable disk brake, but spent most of the day on fluid disk brakes and flushing the systems. 


That bench partner above was so patient and helpful to the geezer in the beat-up tan blazer! Gabe, I'm in your debt. But the process is easier than it looks, if you have the system set up. (I'd done one at the Bike Exchange that didn't work out, and I now have reason to believe that the problem wasn't my technique, but a problem in the brake system.)

Friday:

Friday was cranks, bottom brackets, and bearings. I've done a lot of these, but I had another chance to do a loose ball bearing fitting (MUCH better this time!! ... and I may be the only person in the class who's actually worked on them in a bottom bracket), and to do press-fit bearings. These have been removed and installed so many times that I'm sure they're looser than most, but the mounting is mostly in having the tools, and setting them up right. The Excellent Wife (TEW)'s bike has 'em, and they're of a type that probably should have been serviced already, so I'll go see to that. (And it's a reason to buy some new tools!!)


The school is across the railroad tracks from several things you'd like to do at lunch (like get to the Ashland Food Cooperative), and the follow-the-streets route goes a long way around. I'd seen in the classroom that there was a shortcut across the tracks, but couldn't figure out where it started. I overheard other students talking about it today, and got the info and tried it... but part of it is overgrown, and doesn't make good going for a guy who walks with a cane sometimes. So I'm stickin' to the streets.

morning walk in ashland

 In the rest of the world, it may be spring, but the mountains around Ashland Oregon care not a whit for that, and make their own weather; it snowed in the mountains last night. I took a walk to get some pictures.

The AirBNB where I'm staying is in the lower left of the picture above.


And in my ramblings, I found a path that led to Railroad Park, on the other side of the tracks from the AirBNB. There is a Names Project installation there, after the Black Lives Matter protests.



Ashland being situated where it is, the installation has, of course, been vandalized. I think that's a good thing: it's a reminder that, as far as managing racism goes, we're nowhere near done.

awestruck, maybe


 I'm away at the United Bicycle Institute's Professional Repair and Shop Operation two-week class (there will be other posts about that). The Excellent Wife (TEW) accompanied me for the first week, and I don't post about being away while the house is empty, but she's back, and I'm alone here now. For the middle weekend of the class, I decided to take a drive to Jedediah Smith National & State Park to see the giant redwoods. TEW had gone by herself earlier in the week, and told me what to expect for the trip. 

But I don't think anything could have prepared me for the experience. It's a day later, and I still don't have words for it. I'll post some pictures, but they don't do justice for what being there was for me.








I make jokes about everything. I talk all the time. 

I have no words for this.

Sunday, April 14, 2024

the limits of politeness, and many greetings


 I lost control of this one before it even started; there's an understanding that Princeton Free Wheeler ride leaders will limit rides to fifteen riders. I forgot to put in the limit, and before I knew it, I had twenty-two registrants. I had to turn someone away. A fellow leader set up his own ride to trail mine.












 Almost everybody on this one rides faster than the posted ride speed. I make sure that nobody rides alone, so I'm usually in the back by the end of the ride. The faster horses in attendance rode behind as we started... but, by the time we were four miles in, the fastest group broke off the front. At about seven miles, another group went out front (although this one mostly waited at turns).

So I decided the limits of politeness for this group ended at about seven miles.

No harm, of course; I was riding with two others who apparently wanted to ride the pace I did, and I had a good time with them. One of them, David G, is a neighbor at the new house into which we just moved; in view of the temperature range, he asked for a ride to the start, and intended to ride home on his own later. 

My performance has been unpredictable recently, but I was in good shape today (probably as a result of loading up on good food and empty calories at dinner last night, in celebration of mine and The Excellent Wife [TEW]'s 27th wedding anniversary [and how on earth did it happen that I'm married for twenty-seven years?]).

We rolled over my usual roads, on a great day that was just a bit windy (you can see the route and my performance on my ride page). We stopped at that Sweet Gourmet in Montgomery/Skillman/Franklin or wherever it is.




(I'm refraining from posting some incredibly unflattering pictures here. They're really blackmail-worthy.)

After the stop, we started to get separated again, and one of the riders in the back got a flat. Rickety G and I stayed behind to offer suggestions and judgment, and it took a while for us to get going again, but get going we did... to come up on "Wireguy" Michael S in a van (he'd led another ride locally), taking David G back to the start; David had gotten a flat, and had had problems in the past getting his disk-brake wheel back into place, and didn't want to risk more. David asked me for a ride from the start back home in the car; he would wait at the end of the ride, only a few miles further on.

Also with them, though, was friend Bob N, with whom I've ridden a gazillion times. Bob's involved in some new project or other, and between his busy-ness and my move, I haven't seen him in far too long, so we rode together for a few.

When Bob turned off, the rider with the first flat, Rickety, and I put in some pretty fast pacing on the way back to the start (it was fast pacing for me, anyway, especially with thirty-plus miles just under my belt). I chatted with the rider with the flat about riding the rest of the way home on a repaired tire, and how I never trust them, and always feel relieved when I actually get back to the start without further incident.

Don't you feel like that, too?

Tuesday, April 9, 2024

in buffalo for the eclipse

 The Excellent Wife (TEW) and I have just moved to a new house... and two days after we moved, we were off to Buffalo for a long-planned trip to see the eclipse. It had been one of my wife's "bucket list" items, and I make a practice not to stand in the way of those.

It was great. I wrote the following to an acquaintance who lives in England:

==

Buffalo, NY was cloud covered most of the day, which worked reasonably well for viewing the eclipse. While we had the approved protective glasses, we only needed them for those few occasions when the clouds broke and what was left of the sun showed through. Instead, the clouds provided protection, and while they did sometimes completely block our view of the sun, more often the clouds we just enough so that we could see the eclipse happen without the need for protection.

Totality was scheduled for about 3:18pm local time, but occlusion of the sun started about an hour earlier. We went out to the street and stood where we would be able to see. Across the street, there was a bar where a number of customers had been preparing (ahem!); one was so prepared that he fell over backwards, but we later saw him up on the roof with the others. There was a festive atmosphere; we had three locals standing on the street with us sharing thoughts and politenesses, and later the excitement and giddiness.

It takes a LOT of occlusion to change the quality of the light locally, but as the sun got more and more covered, darkness came on. It wasn't the darkness of sunset - the colors were different, and it came on much more quickly. As totality approached, the darkness became more complete: streetlights came on, and we noticed cheering and shouts from other bars on this street. Even through the clouds, with totality we saw the irregular corona, and a bright spot towards the "bottom" of the sun that we later learned was a sun flare.

And then the light began to come back, and within about a half-hour, the light was back and we went on our way. My wife had made this a "bucket list" item, and was still excited and grinning at bedtime.

==

My wife got some video of the event:

 


We came back to a house full of unopened boxes, and we still can't find anything. Moving is crazy. But the eclipse was immense.

Saturday, March 30, 2024

just what i wanted to do

Yeah, there haven't been a lot of ride updates. Weather hasn't cooperated, and when it has, real life has gotten in the way. The Excellent Wife (TEW) and I are moving from a town house in North Brunswick to an over-55 community in Monroe (it seems like a great move for us; we're excited, but it's stressful and time-consuming). And I went back to work as a favor to my old boss, who was great to me before I retired... but the job has eaten more of my schedule than I'd anticipated. 

So those are my excuses.

I had some time for a ride today... but my usual crew were doing a hilly ride, with the same route that I had such a bad time on in January. I'm not in the best shape I've ever been in (my weight's up, but I also find sometimes that I ride better when my weight's up, so who knows?), my performance is unreliable (sometimes I'm fast [for me], and sometimes I'm really not, and it's no fun to be the person who's falling off the back and making everybody wait)... and maybe I just don't really like hilly rides.

Several of my usual riding companions are going on a hilly trip late in the summer, and are training for that, and the scuttlebutt is that their rides are going to be increasingly hilly and demanding for the upcoming months. So maybe I'm looking for other rides.

But friend Tom H, who for various reasons isn't up for hilly rides either, reached out about a flatter ride with a friendly pace, and that sounded just the thing. Jack H decided to come, too.


Tom came up with a route from Etra Park that went 40 miles, over roads I don't usually ride on, that brought us close to my current town home in North Brunswick AND the new place (thanks, Tom; now I have some ideas on where to ride from the new home). Forty-ish miles, with only 1000' of climb or thereabouts. The wind was strong for some of it (notably in the last quarter; couldn't you have planned that better, Tom?), and we still came in at a pace in the mid-14's, which is reasonable for this guy who's pushin' 70 so hard it's starting to complain. It was just what I wanted to do.

We stopped at the James Brew, a coffee place in Jamesburg.


It's a shame it's so close to home; it's a pretty good stop. It's nothing on the Mendoker's that used to be in Jamesburg (the three storefronts they used to occupy are still empty (and they closed in, like, 2017, but we still remember them fondly), but this James Brew was friendly, with decent empty calories. I'm not the guy to ask about the quality of coffee (I really do like Dunkin' Donuts best, and that coffee is good, to me, that comes closest to DD), but I do intend to stop there again.

You can go check out the ride page.

(Sigh.) I gotta find some flat routes around here. I frequently say I can get lost in a bathroom, but I need to get some routes.

Sunday, March 17, 2024

philly bike expo

 Between the demands of moving (to another part of the same county we live in now), failing fitness (I can't reliably ride at the rates, or for the distances, that I could even less than a year ago), and various weirdnesses with friends and associates that I won't elaborate on here, I've been anywhere from out-of-sorts to completely crazy for a few days (The Excellent Wife [TEW] and I suspect there might be a nickel's worth of a seasonal affective disorder in the cocktail). So when I mentioned that the Philly Bike Expo was this weekend, TEW insisted that I take a day and go. So I did.

I chose to go on the Sunday, because there was to be a presentation entitled Bikefitting for Cycling Literacy. I don't know much about bikefitting, and thought that would be the main topic... but it wasn't. The presenter was a Brooklyn bike fitter who's gender-non-binary, and makes a point of engaging people into cycling who are atypical for the endeavor - not just the LGBTQ+ folks, but women, short and tall people, heavier people, long- and short-waisted people... in fact, anybody who's not a white, heterosexual male over the age of 40. 

It was a great presentation. I teach the Basic Bike Maintenance course for the Princeton Adult School, and this presentation changed the way I will teach. I'm co-manager of the New Brunswick Bike Exchange, and this presentation will affect the way I deal with customers, neighbors, and volunteers. 

And I came to another realization. Most of the folks I ride with regularly, ride together almost all the time. When the club has all-paces rides, and people come together and and ride together who don't normally do so, these friends generally do their own thing. It is undoubtedly riskier to ride with comparative strangers. But first, we were all strangers once. And second, it is elitist to leave out newer riders from these in-groups. And third (and probably most important), I like to meet and ride with new people! I like to see new riders on those first few rides, when their skills and behaviors improve so dramatically. 

Similarly, I like the big ride-for-a-cause supported rides: I like seeing all the different riders and bikes (and different kinds of riders and bikes) that come out, and I like going places I wouldn't normally go, and I like the new rest stops, and even the (often terrible) provided lunches. There was a table flogging the American Cancer Society Philadelphia Bike-A-Thon, and it sounds like a great time.

I plan to do more of the biking I like. That was one of the gifts I got at the Bike Expo today.

There were also, of course, beautiful bikes.











...and beautiful parts:


Above, King Cage; they make hand-bent bottle cages in steel and titanium in a number of styles. Yes, cages can be had for $4, but they're not these. Below, the titanium dustpan they made, because they could.




Above, Silca. Once upon a time, they were known for expensive, but serviceable and repairable pumps and bike accessories. As far as I'm concerned, in 2024, they make jewelry: the stuff works, and it's beautiful, but it's ridiculously expensive for what it is. They've also taken the process of waxing chains, and made it complicated in an effort to make it easier.

Below, the Bike-A-Thon I referred to above.


I hooked a pocketful of stickers to decorate my workspace in the new garage, and bought a replacement for my Suzu Crane bell, with a tone and sustain that defies description. I got out cheap.

A good day.