Sunday, May 26, 2024

tryin' to save some for tomorrow

 The club has an all-paces set of rides set for tomorrow. Some members don't like the all-paces, because they'll be riding with people with whom they're not familiar and may be surprised by riding styles, but I like them, because I get to see club members I don't see on the rides I lead or go on. And I feel a responsibility to the club to lead on these all-paces days.

But so many of them are Mondays, which means if I ride the weekend, I might go into this ride with two riding days just before... and the all-paces might be a tired day. I looked at the rides for yesterday (Saturday), and all of the ones I'd usually go on, were demanding for distance, or climb, or both, So I satisfied myself with a flat 30-miler, riding to two favorite start locations near the new home, Village Park in Cranbury, and Etra Lake Park in one of the Windsors (I can never remember which one, and I'm too lazy to look it up now).

For today, I pulled out one of my shortest, flattest routes, thinking I'd take it at a reasonable pace, and still have some left for tomorrow. I posted the ride, and it filled up.



I started out with the best of intentions... but then I got caught up. All of the riders in this group are strong, and, even though I made a point of falling to the back and riding with the slower folks, the slower folks were riding at a clip faster than the posted pace. I didn't check the average pace at all until we were about twelve or fourteen miles in, and we were over 15mph, outside the posted range.

We came around to River Road near South Branch, and I started seeing detour signs. I thought I'd have to either change up the route or go over some closed roads a la Tom H, but the bit we needed to ride on was wide open. By the time we got to that Italian Bakery in Raritan, we were averaging over 15.5 mph. Nobody was falling off the back; everybody was keeping up and carryin' on.





And back. In the past, there's been traffic on Roycefield that's a bit scary, but it was light today. We stayed together after the stop until some of us got stuck at a light at Amwell Road... but we got back together in Millstone. (The Sunrise in Millstone is open Sundays for the summer, if anybody goes...)

On Canal Road, I looked at my pace, and listened to my complaining legs, and slowed down to a more regal pace, allowing the rest of the ride to pull ahead. One of the riders waited for me, and we solved humanity's problems and the mysteries of human relationship as we rolled to the end.

I still wound up with a 15.3mph average. So much for savin' some for the ride tomorrow.

Monday, May 20, 2024

proof

 

The certificate of completion for the UBI bike school came today.

As did the certificate for my Certified Bicycle Technician designation.

There may not be room in the house for The Excellent Wife (TEW), and me, and my ego.


Sunday, May 19, 2024

back to normal


 Above, Len C, whom I haven't seen in far too long.

Today I got back to leading a ride for the Princeton Free Wheelers, my bike club. This is only my sixth lead for the year, and I'm not gonna make my goal of forty leads... but I plead busy-ness: selling and buying the house, moving, the trip to Buffalo for the eclipse, the bike mechanics class.

Nonetheless, I had fifteen for my ride, and would have had more had I not limited the group. I had four cancellations, and for each cancellation, I had another rider register within an hour.




I've moved to Monroe, and I had thought to start a ride from one of the start locations near there... but when I looked up rides from Cranbury, I went to the club route library on RideWithGPS. I didn't make an exhaustive search, but of the routes I saw that were the right distance, either I couldn't figure out where the stop was supposed to be, or it was clear that the stop was at a location I didn't want to use, either because we are no longer welcome there, or because they haven't updated their stock or cleaned their facilities in any year that has a 2 as the first digit.

So I decided another visit to Sweet Gourmet was in order, and that meant one of my familiar routes out of the Claremont School. As I noted, there were enough takers that I guess it was a good idea.

And while we did bring it in at the appropriate pace (as you can see on the ride page), we were a strong group (including me, which has not been the case this year). We went easy on the hills, but some of us were crankin' when we were able to do so. It was a fun ride on a great day.

At the Sweet Gourmet:






And I've apparently decided that even carbon fiber bikes can be beautiful.



Yeah, it surprised me, too.

So I'm going to look for some routes that start closer to my new home... but in the meantime, there is apparently some interest in continuing those rides from Franklin. Or something.

Saturday, May 11, 2024

a little pilgrimage

 So when you're driving the five-hours-or-so from Ashland Oregon up to Portland, and you've got a little less than an hour to kill before you have to refill the rental car with gas and return it to the airport, and then go check in for your red-eye flight... what do you do?




I went to Powell's Books, the largest independently-owned bookstore in the country.

It was a delight. I was giddy. I didn't have time to browse for a book, but I got a sticker.

I hope to be back to the world by Monday. I've got customers lined up, and bikes to fix.

Friday, May 10, 2024

bike mechanic school: final days

(This is the fourth of four posts: you can find the first here, the second here, the third here.)

The emphasis in the last two days of mechanic school was on making a profitable business, whether as a mechanic or in some associated role in the bike industry. The practical work was a complete bike service, including breaking down and servicing all the systems, but at every step, we were also talking about maintaining customer service, minimizing liability, charging rates that were reasonable both for the customer and for the shop, informing the customer of unexpected charges, and the like. I found if difficult to both do the service on the bike to a level acceptable to the instructors, and do a writeup that was appropriate. 

Today we did no practical work. Instead, we had discussions of the bike industry generally, regional variations, sources of supply, community relations, and the like through the morning. 

After lunch was the exam: 100 questions in 90 minutes. There are different tests (although they may be the same test with the questions in different order). We had access to the book and our notes, to the tools in the shop, and to the information tables at every workstation... but if I'd counted on bei.ng able to look up all the answers, I never would have completed on time.

I got the certificate of completion, and I'm reasonably sure I passed the class and will get the certification; I'll post the results in either case. I can't give a picture of the completion certificate, because between the 6lb student manual and some specialty tools I bought (at a good discount), my luggage would have been overweight. The secretary of the school offered to have the tools and manual shipped to me... and the certificate will be in that box. So more will be revealed as it occurs.

Thursday, May 9, 2024

bike mechanic school: a better day

(This is the third of four posts: you can find the first here, the second here, the fourth here.)

Wednesday of week two at the bike school. We studied mountain bike suspension systems, and I learned a lot of the theory of how the various fork systems work, and about setup of a new bike for a rider. (I also learned I don't want to do a lot of work on these; much of the service is proprietary, other service requires tools I don't want to have to get. And there's waste oil to have to deal with... And a number of these services are supposed to be performed every 40-100 hours of riding. If a rider puts in ten hours on a weekend - not impossible for an enthusiastic rider - that's service as often as every four weeks. Are all those guys at Blackwells Mills/Six Mile Run doing that?)

We also did some frame preparation work. The heat required for assembling metal frames (which are brazed or welded together) causes inescapable deformation in the frameset, and modern components (especially) require near-perfect alignment to work properly and have a reasonable lifespan. We learned about chasing threads, and facing bearing surfaces. It's not hard work, but it requires thousands of dollars worth of tools. I suspect older, more-established shops will have the setups (especially those that cater to elite riders), and I'll probably refer the work to them. But it was fun to do, and good to have the experience and know what I'm looking at.

Because the blog presents these posts in reverse chronological order, my first two posts appear after this one in the blog, so I figured I'd put up a few establishment pics so you know what the place looks like and what we're doing. Below, one of the workstations:


Commonly-used tools and fluids are on the board; other tools are in the drawers at the left. Instructors come around daily to check that the tools are all in place and present. The practice teaches having an organized workspace, and I like it; I could easily do with improvement in my organization.

Each station has a road bike to work on:

... as well as a mountain bike and a gravel bike.


The school makes a point that these bikes are not available to ride. I initially thought it was just about not wanting to risk losing the bike, but because these bikes are constantly being worked on, many of the parts are not torqued to specification (because so much opening-and-reattaching would weaken threaded surfaces), and there are other modifications that make them great for the classroom, but hazardous on the road.

The school has also built up some specialty assemblies, which are kept at each workstation:


This one has a lot going on: in addition to a threaded 1" stem (which was common on the bikes I grew up with - that's the one with the adjustable handlebar height, and it's still common on less-expensive bikes), it's also got a cable-actuated disk brake on one side, and a linear-pull "vee" brake on the other.


On the left of this assembly, there's a two-piece crankset in a press-fit BB30 bottom bracket; on the right, a three-piece crankset with a loose-ball threaded bottom bracket. I am ridiculously proud of having been able to overhaul both.

(If you read the blog post I posted earlier [it's below if you're reading from the top of the blog], you know I had an attack of vertigo in class. It hasn't recurred. I'm taking extra care of myself, just in case.)



Tuesday, May 7, 2024

bike mechanic school, beginning of week two: shifting, vertigo, and headsets

(This is the second of four posts; you can find the first here, the third here, the fourth here.)

In my last post, I wrote about being in the last bike licensed bike mechanic school in the country, and how much I loved it and what I was learning. Today is Tuesday of the second week; we learned about shifting systems yesterday and this morning...

... and then, as we were going into a break about 10am, I started to see the room spin. Soon thereafter, my legs were weak, and I felt hot; I tried to get outdoors to cool down, but couldn't; I was caught by a couple of classmates as I fell. Two others of my classmates had EMT experience; one pulled out a blood-pressure cuff (from where?) and a diabetic classmate got out some test strips. I sat outside for a bit, and the EMT-experienced guys thought a visit to the ER was in order.

The dean of the school brought me to the ER, while the provost left a message and sent a text to my wife. All this time, I was mostly worried about getting back to class to make up the stuff I'd missed, and hoping I wouldn't have to drop out of class - and if I did have to drop out of class, I hoped my subsequent death would be immediate and painless.

But I cleared up in the ER (mostly), and within three hours, I was seen by the doc (if you have experience with ER's, you know this is unimaginably fast); he ran through some of the possible causes, which range from nothing-in-particular (like dehydration or electrolytes) to oh-my-god-I'm gonna-die-horribly (like brain tumors and cardiac problems). I told him I was an easterner, and he gave me a list of problems to go over with my doc when I got home, and told me it probably was not a rush to deal with this stuff, UNLESS it happens again while I'm here in Oregon. (I've had dizzy spells before, mostly when I was in grammar school; the last about 20 years ago. And I've been eating unusually, sleeping poorly, and generally living like I have no routine, so I suspect those are the real reasons.)

I got back shortly after lunch. I'd only missed a few bits about headsets and steering systems (I know a lot of that stuff) and a too-short discussion of electronic shifting (I'm of mixed feelings about that; I had hoped there would be more... but if there HAD been more, I would have missed that, too).

Except for the lecture, I'm caught up with the school, and I'll be catching up with the text when I finish this post. This day has been too memorable. We're on to suspensions tomorrow, and I, for one, will be grateful for the lack of drama.

And how was your day?